 |
|
|
Home : Oil Additives
|
Microbicide MP8
Part No: MP8
|
Description:
Serious microorganism control requires an exceptional microbicide
MP8. Microbicide MP8 kills bacteria and fungi in a number of industrial
applications which normally require different products. MP8 is quick,
effective and economical.
Composition:
Actually, MP8 is a synergistic combination of two highly effective
microbicides that provides a broad-spectrum of microbicidal activity,
particularly where control of microbiological growth has been historically
difficult. Synergism implies that the combination of two active ingredients
enhances total product activity and is therefore more effective than either
ingredient alone. The active ingredients in MP8 combine to broaden the
spectrum of efficacy and decrease the amount of time and active
ingredient required to achieve an effective kill.
Performance
Characteristics:
The combination of synergistic ingredients in MP8 not only broadens the
spectrum of control but also increases the level of activity. MP8 is not
only effective against bacteria that cause fouling and corrosion, but also
fungi. Incidentally, if algae is present, it will be killed. MP8 is
recommended and effective for use in both petroleum and water systems
when used according to label instructions for specific applications.
Uses & Applications:
Crude and Refined Oils:
Use in olefinic, aromatic, paraffinic and naphthenic oils as an oil-soluble
preservative during bulk storage.
Fuels:
Use to eliminate or prevent growth of microorganisms in distillate and
residual fuels including gasoline, #1 diesel, #2 diesel and Bunker C,
where such fuels are used in bulk storage tanks, locomotives, boats and
ships, farm equipment, construction equipment, and diesel generators.
Drilling Fluids:
Use to stabilize several types of drilling fluids and muds used in drilling
of wells where such fluids are subject to microbiological degradation.
Petroleum Secondary Recovery:
Use to control slime-forming bacteria and other problem-causing
microorganisms in floods, water-disposed systems, and other oilfield
water systems.
Treatment Rates:
Drilling Fluids
Petroleum Secondary Recovery
Crude and Refined Oils
Fuels
0.2 1.0% by weight
15.6 52.0 fluid ounces per 1000 gallons water
2.4 24.0 fluid ounces per 1000 gallons oil
1.25 2.5 fluid ounces per 100 gallons fuel
(2.5 fluid ounces per 100 gallons fuel for shock or clean-up)
Note:
MP8 is not for use in aviation fuels. For commercial and industrial use
only. This additive may exceed the federal 15 ppm sulfur standard for
diesel fuel required in 2007 and newer motor vehicles. Improper use of
this additive may result in non-complying diesel fuel. MP8 is a registered
pesticide and a hazardous product. Its usage is governed by all the
directions and precautions on the label of the product. It is a violation of
federal law to use this product in a manner inconsistent with its labeling.
This product must not be handled or used in any way that will allow it in
its neat form to come into bodily contact with any persons.
|
|
|
|
|
