510-M Armor Plate with Moly-D
Multipurpose XHP Gear Lubricant

Description:
A superior multipurpose transmission, differential, and worm gear lubricant blended from the finest bodied pure petroleum base stocks available, Armor Plate with Moly-D Multipurpose XHP and Primrose Plus Multipurpose XHP Gear Lubricants are designed to meet the heavy requirements for military, fleet, farm, construction, and road equipment. These multipurpose gear lubricants provides greater lubricity and resistance to extreme pressure, shock impact, shearing, galling and structural failure of teeth or other vital components in gears, transmissions and differentials.

Composition:
510-M and 510 are formulated with base stocks which are carefully selected mid-continent oils and contain a wear preventing additive that provides anti-weld properties exceeding those described in performance tests by military specification MIL-L-2105B. The additional additive package increases the performance level in order to allow a safety margin in excess of the protection required by normal service.

They also contain:

• Adhesive/Cohesive Additive
• Anti-Foam Agents
• Pour Point Depressant
• Anti-Wear Additives
• Moisture Inhibitors
• Oxidation Stabilizers
• Corrosion Inhibitors
• Seal Swellant
• Dispersant Additive
• Cooling Agents
• Oxidation Inhibitors
• Rust Inhibitors

PerformanceCharacteristics:
Armor Plate with Moly-D Multipurpose XHP and Primrose Plus Multipurpose XHP gear lubricants meet and exceed:

• MIL-L-2105B
• API Service Designations GL-2 through GL-5 Plus
• API MT-1
• Rockwell Standard 0-72, 0-73, 0-76, 076F
• L-33 Moisture and Corrosion Test
• L-37 High Torque Axle Test
• L-42 High Speed Axle Test
• L-60 Thermal Stability Test
• SAE Extreme Pressure Test
• Ford M2C105-A
• Ford M2C108-C
• Mack GO-G
• Oldsmobile-Buick Bump Shock Test
• Protection against low speed, high torque wear and high speed shockloads

510-M and 510 are designed for hypoid gears that are subject to high-speed operating conditions and extreme pressure, providing increased anti-score protection exceeding that of Ford Reference Gear Oil L-1000.

Specific uses are for a high offset hypoid (less than 2.0 inches and approaching 25% of ring diameter). 510-M and 510 can also be used in regular gears for maximum protection especially when using extended drain intervals and for thermal stability under operating temperatures in excess of 300ºF.

Uses:
Multipurpose XHP Gear Lubricants No. 510-M and 510 are recommended for use as service fill of axles, all manual transmissions, transfer cases or power dividers, all heavy duty hypoid and spiral bevel axles, limited slip differentials, all automotive and industrial worm gears and as initial fill on conventional axles using phosphate treated gears where MIL-L-2105B products are specified. 510-M and 510 are also U.S.D.A. approved for restricted use in official establishments, operating under the Federal Meat and Poultry Inspection Program (H-2). They are recommended for use in oil field rotary tables and mud pumping units to ensure extra protection for these heavily loaded units. Armor plate with Moly-D Multipurpose XHP Gear Lubricant can also be ordered by the part number 710M and will bear the label, "Armor Plate with Moly-D Gear and Mud Pump Oil."

Applications:
These lubricants are available in three viscosities – SAE 80, SAE 90, or SAE 140. The SAE weight selected for any particular piece of equipment should correspond with the recommended SAE weight indicated in the owner’s manual or Check Chart.

Both products Armor Plate will blend readily with any approved petroleum base gear lubricant of the same SAE weight; however, it delivers optimum performance when used exclusively in any gear box or application to which it is introduced.

Additional Info:

  Testimonials

1. Darren Warner, Silver Jack Electric Co.

Ordering Info